If you're looking for a powerful exhaust system for your Ford Falcon XR, then you need to read this guide. This guide will walk you through the steps necessary to install a ford falcon fg xr6.
First, you'll need to remove the original exhaust system. This can be done by removing the screws that hold it in place, or by simply pulling it off. Once it's removed, you'll be able to install your new exhaust system.
The first step is to measure the length of your new exhaust system. This will help ensure that it fits properly. Once you've measured the length, you'll need to mark the location on the car where the system will be installed.
Extended Warranty: You can get an additional three years or 50,000 miles on your warranty when you install a Ford Falcon XR exhaust system. Many Ford dealers will offer this at no extra cost to you when you purchase one from them.
Next, you'll need to cut the tubing that's needed for the system. The tubing should be long enough to reach from the muffler to the end of the car. Make sure that the tubing is long enough so that there's plenty of room for expansion and contraction.
Finally, install the exhaust system in accordance with instructions provided by Ford. Remember to use all of the proper mounting hardware, and make sure that everything is tight before painting or decorating your car.